Your Basket

Mortice Lock Measurements

When replacing a mortice lock, be sure to check the following aspects of the existing lock.

The PZ size is the dimension between the spindle hole and the cylinder (as shown below). If a mortice lock has two spindle holes it will have two different PZ sizes.

Mortice lock PZ size

Also make sure to compare the backset size. The backset is the measurement from the end to the centre of the cylinder. Don’t forget to measure the overall height and width of the faceplate as well.

Mortice lock backset measurement

Note: The word Mortice is sometimes spelt Mortise outside of Europe.

© 2019 DG Supplyline Ltd, 122-124 Prince Avenue, Westcliff-on-Sea, Essex SS0 0NW. England UK
VAT Registration No: 752 4080 47 - Registered In England No: 3970957
Tel: 01702 351911 Fax: 01702 346331
Website by Silkstream